AeroComm manual ZB2430 TRANSCEIVER MODULE, Z B 2 4 3 0 F E A T U R E S, O V E R V I E W

Models: ZB2430

1 62
Download 62 pages 17.51 Kb
Page 6
Image 6
ZB2430 TRANSCEIVER MODULE

ZB2430 TRANSCEIVER MODULE

1

AeroComm’s ZB2430 module is based on the IEEE 802.15.4 wireless communication standard and the robust ZigBee networking protocol and is one of the most powerful ZigBee compliant solutions on the market today. The ZB2430 provides OEMs with industry leading 2.4 GHz module performance in low power consumption, easy integration, long range, and superior features and functionality. Requiring no additional FCC licensing in the Americas, OEMs can easily make existing systems wireless with little or no RF expertise.

Z B 2 4 3 0 F E A T U R E S

Mesh architecture

Energy harvester compatible

Retries and Acknowledgements

Programmable Network Parameters

Multiple generic I/O

250 kbps RF data stream

Software selectable interface baud rates from 110 bps to 115.2 kbps

Non-standard baud rates supported

Low cost, low power and small size ideal for high volume, portable and battery powered applications

All modules are qualified for Industrial temperatures (-40°C to 80°C)

Advanced configuration available using AT commands

Easy to use Configuration & Test Utility software

O V E R V I E W

The ZB2430 is a member of AeroComm's FlexRF OEM transceiver family. The ZB2430 is a cost effective, high performance, Direct Sequence Spread Spectrum (DSSS) transceiver; designed for integration into OEM systems operating under FCC part 15.247 regulations for the 2.4 GHz ISM band.

To boost data integrity and security, the ZB2430 uses DSSS technology featuring optional Advanced-Encryption Standards (AES)1. Fully transparent, these transceivers operate seamlessly in serial cable replacement applications. Communications include both system and configuration data via an asynchronous serial interface for OEM Host communications. All association and RF system data transmission/reception is performed by the transceiver.

This document contains information about the hardware and software interface between an AeroComm ZB2430 transceiver and an OEM Host. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings.

Note: Unless mentioned specifically by name, the ZB2430 modules will be referred to as "radio" or "transceiver". Individual naming is used to differentiate product specific features. The host (PC/Microcontroller/Any device to which the ZB2430 module is connected) will be referred to as "OEM Host" or “Host.”

1.Feature not available at the time of this release.

www.aerocomm.com

Page 6
Image 6
AeroComm manual ZB2430 TRANSCEIVER MODULE, Z B 2 4 3 0 F E A T U R E S, O V E R V I E W