AG Neovo F-419

Note: The monitor is compliant with VESA FPMPMI standards and can be wall- or

arm-mounted. Before wall-mounting or arm-mounting, please disassemble the

monitor stand first.

9. Unscrew screws of the hinge bracket

10. Remove the stand from LCD monitor

11. The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts,

as well as four 5 mm access holes in the plastic covering as illustrated below.

These specifications meet the VESA Flat Panel Monitor Physical Mounting

Interface Standard (paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).

100mm

100mm x 100mm

Screw Mounting Options

4mm ,0.7pitch threaded holes x4

Contents

Main Table of Content Precautions Installation Power connection Using the Tilt +20 0 Getting Started Package contents Installing and Removing the Base Identifying parts and controls Setup Page Customizing your Monitor OSD Function Menu Working with OSD Groups Attention Brightness & Contrast / OSD Transparency UP and DOWN 2. Phase & Clock / Auto and Input Select Selecting a Color Temperature setti ng Exit Troubleshooting Out of Range No Input Signal LCD Panel Display Technical Features and Specifications Monitor Page 14 Supported Timing List 15 2. 640x400 56Hz and 1024x768 66Hz modes cannot be supported when Digital (TMDS) input. Regulations 17 TCO'99 Bio-accumulative is defined as substances which accumulate within living organisms Lead, Cadmium and Mercury are heavy metals which are Bio-ac cumulative.