AG Neovo TSC-40/IC 13. Notes on use

TSC-40/IC Product Specification

13. Notes on use

§ When using the product, do not place it close to, or make it contact with, the conductive materials such

as metal.

§ Do not touch the metal part in the product directly with your hands. Or, it may be destructed by the static

electricity. If you contact, or may contact, it directly with your hand, prepare in advance the measure

against static electricity.

§ To store the product, use an appropriate packing box and keep the storage temperature range with no

overload on it.

§ In using the product or storing it, avoid the following conditions:

- Conditions where water is, or may be, attached to the product.

- Conditions where condensation takes place, or may take place.

- In the ambience of organic solvent or acidity or contact, or where the product contacts them.

§ Do not alter or disassemble the product.

§ This specification may be changed for improvement without prior notices.

§ No liabilities are taken by us for any damage caused by use of this product.

§ This product intends to be used for the standard applications (e.g. office equipment and OA devices,

industrial use, communication devices, household equipment). Avoid its use where failure or malfunction

directly may affect the human body or special applications where extremely high reliability is required

(e.g. airline and space industries, nuclear controls, medical use for life-sustaining).

§ Semi-conductor devices may fail in a certain possibility. Keep the safety design in your mind so that

possible failure in this product shall not cause physical accidents such as injury and death, fire and other

social damages.

TSC-40/IC Product Specification

Version 1.2: Issued at July 2, 2008

This document is allowed to redistribute but no alteration, part or all, is prohibited.

http://www.dmccoltd.com/english/

9F Kanda Sent-Building 1-2-4, Yushima, Bunkyo-ku, Tokyo, 113-0034 Japan

Phone: +81-3-5209-7131 (Japanese), 7135 (English) Fax: +82-3-5209-7130