2Connecting the Hardware

Installing the External Contact Interface Board

Installing the External Contact Interface Board

If your Agilent 1100 Series Autosampler is not already equipped with an external contact interface board, install one as described below.

YTo install the external contact interface board

1.If you have not already done so, turn off the autosampler and unplug it from line power.

CAUTION To avoid electric shock, unplug the power cable that connects the Agilent module to line power. After you turn the power switch to the Off position, the power supply continues to draw current.

2.To prevent damage to the interface board, ensure that you are using ESD protection. For more information on preventing damage caused by an electric discharge, refer to the Reference Manual for the Agilent module.

CAUTION To prevent damage to an instrument, always use ESD protection when handling electronic boards and components.

3.To remove the cover plate from the slot where you plan to install the external contact interface board, loosen the two screws that fasten the plate to the chassis of the autosampler.

4.Insert the external contact interface board (see Table 2 for the part number) into the slot, and then tighten the two screws to fasten the board to the chassis of the autosampler. See Figure 4.

Figure 4. View of the external contact interface board installed in an Agilent 1100 Series autosampler

Screws for fastening

the external contact interface board

 

VIAL- # -OUTPUT

RELAY CONTACTS

 

 

 

 

 

1

8

 

 

 

REMOTE RS232

CAN CAN

HP-1B

CONFIG

 

8

Agilent 1100 Series LC Devices Connecting the Hardware and Triggering Data Acquisition

Thermo Scientific

Page 15 Page 17
Page 16
Image 16
Agilent Technologies 1100 Series manual Installing the External Contact Interface Board
Page 15 Page 17

1100 Series specifications

Agilent Technologies 1100 Series is a highly regarded lineup of high-performance liquid chromatography (HPLC) systems designed to meet the demanding needs of laboratories in various fields including pharmaceuticals, environmental testing, and food safety. Known for its versatility, reliability, and advanced technology, the 1100 Series has established itself as a benchmark for analytical performance.

One of the standout features of the Agilent 1100 Series is its modular architecture. This design allows users to configure the system according to specific analytical requirements. The components such as pumps, detectors, and autosamplers can be mixed and matched to create a tailored solution, ensuring maximum efficiency and optimal performance. This modularity also facilitates easy upgrades and maintenance, significantly extending the life cycle of the instrument.

At the heart of the 1100 Series is its advanced pumping technology. The system utilizes precise, high-pressure pumps that ensure a consistent flow rate and excellent reproducibility, essential for accurate quantification of analytes. The binary and quaternary pump options provide flexibility in method development, enabling users to perform gradient elution with ease.

The Agilent 1100 Series also boasts a range of detectors, including UV/VIS, fluorescence, and refractive index detectors. Each detector is designed to enhance sensitivity and specificity, enabling the detection of a wide array of compounds. The UV/VIS detector, in particular, is known for its reliable performance and user-friendly interface, which simplifies method setup and data analysis.

Another critical aspect of the 1100 Series is its autosampler. The system's autosamplers provide high throughput and automatic sample handling, which significantly reduces human error and increases productivity. The intelligent design allows for temperature control and reliable sample injection, ensuring optimal results.

In terms of software, the 1100 Series is supported by Agilent’s OpenLAB software, which offers an intuitive platform for method development, data acquisition, and analysis. This software integrates seamlessly with the HPLC hardware, making it easier for scientists to manage workflows and maintain compliance with regulatory requirements.

Overall, the Agilent Technologies 1100 Series represents a significant advancement in liquid chromatography, bringing together ideal characteristics such as modularity, precision, versatility, and sophistication. Its commitment to innovation and quality makes it a preferred choice for laboratories seeking reliable analytical solutions.
Top Page Image Contents