ESG Family Signal Generators Initial Troubleshooting and RF Block Diagrams
Additional Information for Troubleshooting the ESG-AP and ESG-DP Series
Service Guide 1-23

Additional Information for Troubleshooting the

ESG-AP and ESG-DP Series

Table 1-5 provides frequency-dependent settings for selected points in the RF signal flow of

the ESG-AP and ESG-DP Series Signal Generators. Notice that the settings are relative to

the RF output frequency. This information can improve your understanding of the signal

generator circuitry, especially when used with the RF block diagram.

NOTE The values for Table 1-5 assume FM modulation is turned off.

Table 1-5 Frac-N, YO, and Other Selected Frequency-Dependent Settings for Several
RF Output Frequencies
Freq
Out
(MHz)
Freq
YO
(MHz) NP Frac-N
(MHz) Fif (MHz) Fs (MHz) Hi/Low Output
Divider
4000 8000 9 8 593.75000 37.1093750 884.7656250 High 2
3000 6000 7 10 644.53125 32.2265625 852.5390625 High 2
2271 4542 7 10 605.62500 30.2812500 644.5312500 Low 2
1500 6000 7 10 644.53125 32.2265625 852.5390625 High 4
1001 4004 5 10 685.46875 34.2734375 793.9453125 High 4
1000 8000 9 8 593.75000 37.1093750 884.7656250 High 8
700 5600 7 10 847.65625 42.3828125 793.9453125 High 8
300 4800 6 10 726.56250 36.3281250 793.9453125 High 16
240 6080 7 10 603.90625 30.1953125 864.2578125 High 8
100 7200 8 9 928.12500 51.5625000 893.5546875 High 8
1 7992 9 8 887.62500 55.4765625 881.8359375 High 8