Agilent Technologies E8257D/67D manual RS-232 Interface Configuration

Models: E8257D/67D

1 42

Page 16

Getting Started

Configuring for Remote Control

1.Press Utility > GPIB/RS-232 LAN > RS-232 Setup.

2.Press RS-232 Baud Rate.

3.Press the desired baud rate softkey.

4.Press RS-232 Echo Off On.

This toggles the state of the SCPI echoing on the RS-232 connection. Set as desired.

5.Press Reset RS-232.

This deletes the data from the RS-232 buffer, discarding any unprocessed SCPI input received over RS-232.

These RS-232 parameters are persistent states; these states are not affected by an instrument preset or power cycle.

Chapter 2

Image 16