3 - Setting Up the Test
24
If termination On Watch Events is enabled, you can select the following Watch Items criteria:
ñAll harmonics greater than the specified percent of threshold
ñOdd harmonics greater than the specified percent of threshold
ñOdd ≤ 19 harmonics greater than the specified percent of threshold
ñEven harmonics greater than the specified percent of threshold
ñNth, a specific Harmonic Number that is greater than the specified percent of threshold
Select the Test Options for Voltage Fluctuations

Standard Test Options

Standard options specify the line voltage, line frequency, and test time for compliance tests. They are
selected in the Standard window.
ñSelect the line voltage that you will be applying to the equipment under test.
Selecting Variable lets you enter a value other than 120 Vac or 230 Vac.
ñSelect the line frequency (50 or 60 Hz) that will be applied to the equipment under test.