XES COMMANDS | Page431- |
Sx, Sy indicate the size of the graphic window, measured in 1/300" from the origin of the graphic window.
Fields prior to the semicolon are optional, although blank fields must still be separated by a comma. Fields after the semicolon are required.
This command may be placed anywhere in a document where graphics are desired.
Graphic Delete
▲COMMAND: s+B,optional commentd graphicname.GRAd
▲ RANGE: | 132 characters for optional comment |
This command will delete graphic files from FLASH storage. Fonts and forms may also be deleted with this command.
Graphic Window Repeat
▲COMMAND: sgrM(Mx/My),I,R,,name/F;X,Y,Xn,Ynd
▲ RANGE: See Below
This command copies a graphic window and places it on the page, where:
M is the degree of magnification. If only one value for M is entered, the magnification is proportional. If two values are entered, the magnification will be different for the x and y directions. 0 or 1 will result in no magnification, 2 will double the magnification, and 4 will quadruple the magnification.
I indicates the type of graphics the window will contain, and whether the graphics will be printed reversed. 0 indicates raster data, 1 indicates reversed raster data, 2 indicates vector or macro data, and 3 indicates reversed vector or macro data.
R indicates the degree of rotation, if any, of the graphic window. 0 specifies no rotation, 1 specifies 90º counterclockwise rotation, 2 specifies 180º counterclockwise rotation, and 3 specifies 270º counterclockwise
