General Operation 3
N9360A Multi UE Tester Quick Reference Guide 3-3
Figure 3-1 Typi ca l Te st Set up
Connecting RF Signal:
1Connect the mobile phone to the Tester using the
user-supplied RF Cable, optional Antenna Coupler, or
optional Shield Case.
2On the [Loss] screen obtained from the [Initial],
[Configuration] and [Configuration: Test Condition] screens,
set the “Loss” field to On and enter the appropriate loss
values for each Radio System or Band in the “RF In” and “RF
Out” fields depending on the RF connection.
Connecting a Printer:
•Connect a printer to print a hardcopy of the test results if
required.
Inserting the TEST SIM for GSM mobile phone or TEST USIM for a
W-CDMA mobile phone:
•Insert the Test SIM (Subscriber Identity Module) supplied by
Agilent into the GSM mobile phone or the test USIM
(Universal Subscriber Identity Module) supplied by Agilent
into the W-CDMA mobile phone before performing any test.
•GSM/W-CDMA/cdma2000 Mobile Phone Repair Process