cdma2000 System 6
N9360A Multi UE Tester Quick Reference Guide 6-7
For Pinpointing Failures
Figure 6-5 [Auto Test (1xEV-DO): Stand-by] Screen
1Perform the steps described in "For Go/No-Go" Testing".
2Press the Screen>> softkey to set screen mode to Value.
3Check the values of the measurement results.
Table 6-2 1xEVDO Automatic Test Sequence
Step Action Needed
UATI Assignment Wait until the UATI Assignment is completed.
BS Call The mobile phone automatically responds to the
call.
RF Test Wait until the RF test is completed.
Softer Handoff Wait until the Softer Handoff is completed.
Connection Close Wait until the connection is closed.
Session Close Wait until the session is closed.