Agilent Technologies N9360A When "CDMA Mode" is set to 1xEV-DO mode

6-6 N9360A Multi UE Tester Quick Reference Guide
6cdma2000 System
When "CDMA Mode" is set to 1xEV-DO mode
For Go/No-Go Testing
Figure 6-4 [Auto Test (1xEV-DO): Stand-by] Screen
1Press the Automatic Test softkey on the [Initial] screen in
cdma2000 system
2Move the cursor to the "Procedure" field, and select a
pre-defined test procedure.
3Press the Start softkey.
4Turn the mobile phone on. Wait for the completion of UATI
Assinment.
5Each test flow step is highlighted as it runs.
6After completing the test, check the results on the screen.
7To print the test results or to save them into a USB memory
device, press the More(1 of 2) softkey and then the Print Screen
softkey.