GSM System 4
N9360A Multi UE Tester Quick Reference Guide 4-5
For Troubleshooting
Figure 4-4 [Manual Test (GSM): Stand-by] Screen
1Press the Manual Test softkey on the [Initial] screen.
2Move the cursor to the “Procedure” field and select a
pre-defined test procedure.
3Turn the mobile phone on.
4Wait for the completion of Location Update.
5Press the BS Call softkey and respond to the call on the
mobile phone when it is called. Or, dial an arbitrary number
and press the Off Hook key on the mobile phone to start the
MS Call.
6To start measurement while the left screen is displayed, refer
to step 7. For detailed measurement at each measurement
item, refer to step 8.