4-2 N9360A Multi UE Tester Quick Reference Guide
4GSM System
Figure 4-1 [Automatic Test: Stand-by] Screen
1Press the Automatic Test softkey on the [Initial] screen in GSM
system.
2Move the cursor to the “Procedure” field, and select a
pre-defined test procedure.
3Press the Start softkey.
4Turn the mobile phone on. Wait for the completion of
Location Update.
5Operate the mobile phone as instructed in the table below.
Each test flow step is highlighted as it runs.
6After completing the test, check the results on the screen.
7To print the test results or to save them into a USB memory
device, press the More (1 o f 2) softkey and then the Print Screen
softkey.