Agilent Technologies N9360A For Go/No-Go Testing

5-2 N9360A Multi UE Tester Quick Reference Guide
5W-CDMA System
For Go/No-Go Testing
Figure 5-1 [Automatic Test: Stand-by] Screen
1Press the Automatic Test softkey on the [Initial] screen for
W-CDMA system.
2Move the cursor to the “Procedure” field, and select a
pre-defined test procedure.
3Press the Start softkey.
4Turn the mobile phone on. Wait for completion of Location
Update.
5Operate the mobile phone as instructed in the table below.
Each test flow step is highlighted as it runs.
6After completing the test, check the results on the screen.
7To print the measurement results or to save them into a USB
memory device, press the More (1 of 2) softkey and then the
Print Screen softkey.