ENGLISH

15.Insert two 1/4" x 1-3/4" hex bolts (D) through the handle tube as shown in fi gure 8. Holding the bolts in place in the handle, insert the bolts through the holes in the poly tray, allowing the legs of the handle to slip beneath the latch stand bracket. Secure the two bolts with two 1/4" fl at washers (J) and 1/4" nylock nuts (K). Do not tighten yet. See fi gure 8.

(K) 1/4"

(J) 1/4" FLAT

NYLOCK NUT

WASHER

 

(D) 1/4" x 1-3/4"

 

HEX BOLT

CART WITH TONGUE ARRANGED FOR TOWING

LATCH LOCK

FRONT

TONGUE

(H) 3/8" x 1"

CLEVIS PIN

(G) 3/8" x 4"

CLEVIS PIN

FIGURE 10

LATCH STAND

BRACKET

FIGURE 8

16.Align the holes in the handle with the holes in the bottom of the poly tray, the latch stand plate and the latch stand bracket. Fasten together using four 1/4" x 1-3/4" hex bolts (D), 1/4" fl at washers (J) and 1/4" nylock nuts (K) as shown in fi gure 9. Tighten.

17.At this time tighten all bolts which were left loose.

(D) 1/4" x 1-3/4"

(J) 1/4" FLATHEX BOLT WASHER

(K) 1/4"

NYLOCK NUT

18.Assemble the hitch pin (R) through the tongue and hitch bracket and secure it with the 1/8" hairpin cotter (N). See fi gure 11.

(R)HITCH PIN

HITCH

BRACKET

(N) 1/8" HAIRPIN COTTER

FIGURE 11

FIGURE 9

7