Agri-Fab 45-0462/45-0471 STEP 4:, STEP 5:, STEP 6:, AA HH, HINT:, FIGURE, FIGURE, FIGURE, STEP 4: (SEE FIGURE 4), STEP 5: (SEE FIGURE 5), STEP 6: (SEE FIGURE 6)

STEP 4: (SEE FIGURE 4)

•Assemble the handle tube (D) to the hopper tubes using two 5/16 x 3/4 screws (AA) and 5/16" lock washers (HH).

AA HH

FIGURE 4

STEP 5: (SEE FIGURE 5)

•Insert the ends of the flow control bail (E) into the handle tube (D), inserting the bent end first. The bail should pull back freely against the handle.

FIGURE 5

STEP 6: (SEE FIGURE 6)

•Insert the end of the cable into the flow control bail (E).

•Attach the flow control assembly (B) using two 1/4-20 nylock nuts (FF).

HINT: If the bolts spin when tightening, pull on the bolts and turn them until they lock in place. Push in on the flow control dial to help keep the bolts locked in place while tightening.

FIGURE 6