Aigo PB2200 The Standard Features, The Optional Items, c Compact Flash Memory Card Slot Type

THE STANDARD FEATURES

CPU: VIA C7 1 GHz; HDD: 40 GB or above; RAM: 256 MB DDR2 upgradeable to 2 GB max.

Ethernet Networking: The standard network port works with both 10 Base T and 100 Base T.

Serial Ports: There are 4 serial ports in a PB-2200 Pro system. COM1 is shared by the direct driven cash drawer port and the UPS function. Each COM port is capable of providing independently a +5 V DC or a +12 V DC supply. All these DC supplies are achieved through internal jumper setting and they are all defaulted to give no DC supply at delivery.

Parallel Port: Each PB system is equipped with a parallel port that supports SPP/EPP/ECP.

VGA Port: There is a VGA connector for connection of external monitor with

+12 V DC power supply potential through jumper setting change included. CR Port: Capable of controlling 2 cash drawers through use of optional cable. USB Ports: The PB-2200 Pro series is equipped with 6 USB type A connectors for connection of USB (Universal Serial Bus) devices.

Modem Ring-Up, LAN Or Alarm Wake-Up: The PB series can be turned on automatically upon an incoming COM port Modem call or LAN status or data packet received on LAN or a preset time/day/week/month.

UPS function: to support the system from intermittent power failure (battery itself is an option)

Accidental power off protection – The power switch is safely located at one side, and this power switch can be defined as a “ON” switch only through software command.

THE OPTIONAL ITEMS

Note: Underlined items below must be installed prior to delivery from factory. Attempt to apply them by end users is either too difficult or is likely to cause damages. Italic items below are stand alone peripheral devices.

a)DRAM Memory Expansion: Upgrade up to 2GB max. in 2 DDR2 modules.

b)2nd HDD: 2.5” IDE interface

c)Compact Flash Memory Card Slot: Type I

d)Audio Amplifier and Internal Speaker: This option can be available only in systems equipped with PCI riser card of revision C or later.

e)Customer display: Pole mount 2 x 20 VFD display

f)Wireless LAN Adaptor: inside back cable cover, IEEE 802.11b/g

g)Preload OS: Win 2000, Win XP pro or WEPOS.

h)LCD monitor: 12.1” LM-7112 without touch panel or TM-7112 with touch panel. Both support further options of BC-300, SD-300 or KP- 210.

Part 4