3
OPERATIONS (SECURITY GUARD STATION)
Calling from an entrance station
1When the call is from an entrance station, the call tone will ring for approximately 10 seconds and the entrance station number will be displayed.
2Lift the handset to respond.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
3When you are done talking, hang up the handset to end the call.
• Communication ends automatically after approximately 3 minutes.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
With the expanded system, the display number of the entrance station varies depending on the common line connection of the entrance sta- tion and security guard station.
Connected to same common line: "Set number" is displayed as is Ex.) Call from entrance station #1: "MAIN ENTRANCE: 01" is
displayed
Connected to separate common line: "Set number + 8"
Ex.) Call from entrance station #1: 1 + 8 = 9, so "MAIN EN- TRANCE: 09" is displayed
3-2 Door release
1Press the door release button while in communication with the en- trance station.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
2Door release is activated at the entrance station.
Depending on the electric door release system that you use, door re- lease may be active only while the door release button is pressed.
3-3 Light control
Turning the entrance light on (when light is installed in common area)
1Press the light button once during calling or communication from the entrance station.
1 | 2B |
| |
4H | 3E | ||
5K | |||
Q7R | 6N | ||
8U | |||
| X9Y | ||
| 0 | ||
|
|
2The outside light at the entrance will only turn on for the preset dura- tion of time.
This function is not available if a surveillance camera is installed in the common area.
- 9 -
