Aiphone GTW-LC service manual Lift Control, Data transfer

6-2

[1] [2] [3] [4]

[5]

Lift Control 1

[1]GTW-LC ID

[2]Select“ON”or“OFF”for the GTW-LC connection.

[3]Select“N.O.”or“N.C.”for the Output Type.

[4]Set the Timer. The time setting range is“1 to 600”sec. (one second

increments)

•Clicking the upper spin button will increase the time setting, and clicking the lower spin button will decrease the time setting. At this time, a numerical value exceeding either the upper or lower value limits cannot be set.

•The number of seconds can be input directly by clicking inside of the Timer box.

•Input can be set by pressing the Enter key or by clicking inside of another Timer box.

[5]After GT system settings are completed, the connected GTW-LC ID numbers will display in black if the“Check”button is clicked while connected to GT-BCX.

The system will be in use when Connecting status is being checked. Checking connections is not possible while the system is in use.

6-3

[1][2]

Lift Control 2

[1]The resident information that has been entered will be displayed.

[2]Set which relay will activate in the corresponding GTW-LC for each residence. The setting range is“1 to 20”.

6-4

1

2

Data transfer

1.Select“Export”in the“Connection”menu.

2.If“Yes”is selected, the data will be transferred to GT-BCX.

- 9 -