Aiphone JA-2MECD Operations, Initial picture memory setting, Pan and tilt the door station camera

Initial picture memory setting

Before use, be sure to program in the following manner:

1.Place the unit in SET mode. Press SET button and hold down for more than 2 seconds. Both PLAY & REC buttons start flashing.

2.Choose on-screen DATE location. As desired, move up with PLAY button, and move down with REC button. Press SET button to select. Next, “2003” flashes.

3.Set time in the order of; (1) Year, (2) Month, (3) Day, (4) Hour,

and (5) Minute. 1/JAN/04 0:00

4.Choose PICTURE MEMORY mode. Move cursor to the mode desired. (Most recommended is 16 picture, 4-frame). Press SET button to select.

5.When finished, press TALK button, or programming will terminate in approx. 2-1/2 minutes. All the buttons are no longer lit to indicate unit is in standby mode.

Notes:

•When changing PICTURE MEMORY mode, all the previously saved pictures will be erased. Never change if the saved pictures MUST be kept.

•It is not possible to go back and partially reprogram DATE location or TIME. Go back to initial SET mode.

•If setting has ended incompletely within approx. 2-1/2 minutes, go back to initial SET mode.

7	OPERATIONS
7-1

Pan and tilt the door station camera

The monitor station is equipped with Aiphone's exclusive Pan- and-Tilt control pad. When the video door station is on, press on each edge of pad to move the camera up down and right left.

7-2
[1]	[2]

Instant voice calling for family use

1.Momentarily press CALL button.

2.When chime sounds, the monitor turns on with the image of the caller. Sound from the entry area is heard through the speaker of the inside station(s).

Note: Not available on JA-D door station.

7-3

[1]	MONITOR	[2]	JA-DAC 1
	MONITOR
[3]		[4]
MONITOR	JA-DAC 2

Monitor a door station

1.Momentarily press MONITOR button.

2.Video monitor turns on image of DOOR 1.

3.Press MONITOR button again to switch to DOOR 2.

4.Press MONITOR button to end monitoring.

Notes:

•Inside audio cannot be heard at door station.

•Press TALK button to establish communication with door station.

•The image automatically turns off in approx. 30 sec.

•When DOOR2 is audio-only type (JA-D), it is skipped while monitoring and audio door cannot be monitored.

7-4
[1]	[2]
	DOOR
	1
	2
[3]	[4]

Answering a door call (AUTO mode)

The station is initially set to AUTO voice switch activation.

1.Momentarily press CALL button.

2.Chime tone sounds, and the monitor turns on with caller’s image. Door call-in LED 1 or 2 is lit.

3.Press TALK button momentarily and reply handsfree.

4.When finished, press TALK button once to turn off.

Timer; Call-in, 30 sec. Communication, 1 min. (approx.). Press TALK button to turm back on (if within 30 sec.)

- 7 -