Airlink101 AP671W user manual Universal Repeater, AP Client

8.2 Universal Repeater

Click on Site Survey, select the wireless router or AP you wish to repeat on the popup Wireless Site Survey window and click Connect.

Configure a network name in Main SSID for the repeater to be identified.

8.3 AP Client

Click on Site Survey, select the wireless router or AP you wish to connect on the popup Wireless Site Survey window and click Connect, or enter your wireless network’s SSID manually. Click Next.

8.4 Point-to-Point / Point-to-MultiPoint / WDS Bridge

Same setup procedure applies to Point-to-Point Bridge, Point-to-MultiPoint Bridge and WDS Bridge modes. For bridge mode, you need at least two Access Points. We will use Point-to-Point Bridge as an example.

Select a channel number you wish to use and enter the MAC address of the other Access Point for the bridge. Click Next.

Step 9 Configure the wireless security settings. It is recommended to use WPA2-PSK(AES) which is the most secured encryption for general users.