Section 2
Configuring the Router
Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable modem, and the router.
Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of the cable to the DSL/Cable modem.
Step 2 Power on the modem.
Step 3 With another network cable, connect one end of the cable to your computer’s Ethernet port and connect the other end to one of the LAN ports of the router, as shown in the following figure. (After setup finishes, you can remove the network cable between the computer and router if you want to use wireless connection.)
4
