8
6-2. Basic Connection
Please perform the following steps to connect your device.
1. Outdoor Antenna Connection
Connect a cable from your antenna (outdoor or rabbit-ears) to the
F-Type “ANT IN” connector.
2. Make a connection to the TV using either step 2.1 or step 2.2
2.1 RF AV Cable Connection
Use the supplied RF cable to plug into the “RF OUT” terminal on the
device. Plug the other end of the cable into the TV set. Be sure to set
the CH3/CH4 SWITCH on the device to match the same channel you
select on the TV set. If you set the CH3/CH4 switch on the device to
CH3, please switch TV set to channel 3. If you set the switch to CH4,
please switch the channel on your TV set to CH4.
2.2 AV Cable Connection (not required if you use the RF Cable in 2.1)
Plug the black end of the supplied AV cable into the device “AV OUT”
connector, and plug the other ends of the cable into your TV,
YELLOW terminal for VIDEO IN, RED terminal to AUDIO IN(RIGHT),
WHITE terminal to AUDIO IN(LEFT). Then switch your TV set to Video
input.