Manuals
/
Airlink101
/
Household Appliance
/
Electric Heater
Airlink101
AWLH5026 user manual Configure any encryption setting if required and click Next
Models:
AWLH5026
1
25
29
29
Download
29 pages
19.45 Kb
22
23
24
25
26
27
28
29
<
>
Install
Configure the Wireless PCI Adapter
To open the Wireless PCI Adapter’s utility go to Start All Programs Airlink101 MIMO PCI Utility Airlink101 MIMO PCI Utility
Click Next to accept the default destination folder
For WEP Settings
Page 25
Image 25
Step 4
Configure any encryption setting if required and click
Next
.
Step 5
Click
Complete
to finish the profile setting.
25
Page 24
Page 26
Page 25
Image 25
Page 24
Page 26
Contents
Ver. 1A
MIMO XR 802.11g PCI Adapter
Table of Contents
1. Introduction
1.1 Package Contents
2.1 Install Driver & Utility
2. Installation
Step 4 Click Next at the welcome screen
Step 5 Click Next to accept the default destination folder
Page
2.2 Verify Driver Installation
Step 3 Expand Network adapters from the list and verify that Airlink101 MIMO XR PCI Adapter is listed and no yellow question mark is beside it
Note to Windows XP Users
3. Configure the Wireless PCI Adapter
To open the Wireless PCI Adapter’s utility go to Start All Programs Airlink101 MIMO PCI Utility Airlink101 MIMO PCI Utility
Step 2 If encryption is not enabled for the selected access point / router, skip to step 6. Otherwise, enter a Profile Name for your wireless setting and click Next
Step 4 Select the proper encryption setting for your wireless router or access point from the drop-downmenu and click Next
Step 7 Go to the Link Information tab and click on the More button
4.1 Link Information
4. Configure the Wireless Utility
Page
4.2 AP List
4.3 Configure Encryption Settings
For WEP Settings
WEP Step 6 Click Complete to finish the settings
For WPA Settings
WPA Step 6 Click Complete to finish the settings
To add a new profile, follow the steps below
4.4 Profile Setting
Step 1 Click on the Add button
Step 2 Enter a name for your new profile and click Next
Step 4 Configure any encryption setting if required and click Next
Step 6 Your new profile will be listed in the Profile List
4.5 Static IP Setting
4.6 About
Toll Free
Technical Support
