Turning on/off the backlight

The backlight of the display window of the remote control can be set to remain on or off.

1 While the recorder is stopped, enter the menu and select “OPTION” - “BACKLIGHT”.

2 Select the desired item.

Display

Setting

 

 

AUTOThe backlight lights when

 

you operate the recorder or

 

the remote control, and

 

automatically turns off when

 

no operation is made for a

 

few seconds.

 

 

ON

The backlight lights when

 

the recorder is operating.

 

 

OFFThe backlight stays off.

 

 

Storing the settings for individual discs (Playback Information Memory)

The recorder can store the various settings for each disc, and then retrieve them automatically whenever the disc is inserted.

The following setting can be stored:•Volume•Play mode•Group mode•Program play•Sound quality (Virtual Surround/Digital Sound Equalizer)•Playback speed (Digital Speed Control)

1 When the recorder is stopped, playing, or play-paused, enter the menu and select “USEFUL” - “PLAY INFO”.

“Entry?” appears in the display.2 Press NX/ENTER to enter the selection.

“Entry OK” appears in the display and the disc settings are stored in the recorder.

Erasing the disc information

1Insert the disc whose information is to be erased and verify its contents.

2Select “Erase?” after step 1.

“Erase OK” appears in the display and the disc information is erased.

Note

If you try to erase the disc information of a disc that have never been stored, “No Entry!” appears in the display for a few seconds.

z

“PLAY INFO” appears when the disc with its setting stored is inserted.

Notes

•The settings for up to 20 discs can be stored. Any settings stored afterwards will replace the settings for the least used disc among the 20.

•If you add tracks or perform an editing operation (not including labeling) to a disc whose settings have been stored on the recorder, the disc will no longer be recognizable by the recorder and the stored information will become useless. In this case, store the settings again.

28