Symptom

Cause/Solution

 

 

 

The battery

• This is normal and poses no danger.

charging stand and

 

 

the recorder become

 

 

hot during the

 

 

charging procedure.

 

 

 

 

 

 

 

 

While playing

Symptom

Cause/Remedy

An MD is not

• Repeat play is selected.

played normally.

, Press P MODE/ for 2 seconds or more to change back to the

 

normal play (page 18).

•Playback mode is changed.

,Press P MODE/ for 2 seconds or more to change back to the normal play (page 18).

An MD is not

• Disc playing stopped before it came to the last track.

played from the

, Press NX/ENTER for 2 seconds or more to start playing.

first track.

• The disc information has been stored to the Playback Information

 

Memory.

 

, Erase the disc information from the Playback Information

 

Memory (page 28).

 

 

Playback sound

• The recorder is placed where it receives continuous vibration.

skips.

, Put the recorder on a stable place.

 

• A very short track may cause sound to skip.

 

, Try not to create a short track.

 

 

Sound has a lot of

• Strong magnetism from a television or such device is interfering

static.

with operation.

 

, Move the recorder away from the source of strong magnetism.

 

 

Volume cannot be

• EAR GUARD is on.

turned up.

, Release EAR GUARD settings (page 27).

 

• The “USER” on “SOUND” settings are being applied.

 

, This is not malfuntion. When this setting is applied, the

 

maximum volume setting will be limited to a certain level to

 

prevent excessive loudness.

 

 

No sound comes

• The headphones/earphones plug is not firmly connected.

through the

, Plug in the plug of the headphones/earphones firmly to the

headphones/

remote control. Plug in the plug of the remote control firmly to

earphones.

i.

 

• The plug is dirty.

 

, Clean the plug.

36