Aiwa AM-NX1 Messages, Error message, Meaning/Remedy

Messages

If the following error messages flash in the display window on the remote control, check the chart below.

Error message	Meaning/Remedy
BLANKDISC	• An MD with no recording on it is inserted.
CannotCHG	• You tried to charge the battery at a place with a temperature outside
	the specified range for the recorder.
	, Charge the battery at a temperature of +5° C (+41° F) to +40° C
	(+104° F).
Charging	• The rechargeable battery is being charged.
EAR GUARD	• EAR GUARD is set to "EAR G.ON" and so the volume cannot rise
	higher.
	, Set EAR GUARD to "EAR G. OFF" (page 27).
ERROR	• There is an internal malfunction in the system.
	, Restart the operation by doing steps 1 to 3 on page 38. If the
	message appears again, please consult your nearest Aiwa dealer.
Hi DC in	• Voltage of the power supply is too high (The supplied AC power
	adaptor or the recommended car battery cord is not used).
	, Use the supplied AC power adaptor or the recommended car
	battery cord.
LOW BATT	• Batteries are weak.
	, Charge the rechargeable battery or replace the dry battery
	(page 13).
NO DISC	• You tried to play or record with no disc in the recorder.
	, Insert an MD.
No Entry!	• You tried to erase a setting in the Playback Information Memory on
	a disc that contains no settings in the Playback Information Memory
	(page 28).
READ ERR	• The recorder cannot read the disc information correctly.
	, Reinsert the disc.
SLOW CHG	• You tried to charge at a place where the temperature is too low.
	, Charge the battery at a temperature of +5°C (+41°F) to +40°C
	(+104°F).
TEMP OVER	• Heat has built up in the recorder.
	, Let the recorder cool down.
TOC ERR	• The recorder cannot read the disc information correctly.
	, Insert another disc.
TR FULL	• Track number 254 has been reached.

39