•If the installation seems to be stopped

It may take 30 minutes or more for the installation to complete, depending on your computer or CD-ROM drive.

During the installation, watch out for the occurrence of any of the following problems.

Problem

Cause/Remedy

 

 

The installation appears to have

Check for the appearance of an error message beneath

stopped before it has

the installation window.

completed.

t Press the [Tab] key while holding down the [Alt]

 

key. If an error message has appeared, press the [Enter]

 

key. The installation will resume. If there is no

 

message, the installation is still in progress. Wait a little

 

while longer.

 

 

The progress bar on the display

The installation is progressing normally. Please wait.

is not moving. The access lamp

 

has not lit for a few minutes.

 

 

 

•If the installation is still unsuccessful after all that you have done.

—The installation can be done by copying all files to the hard disk as follows:

1 Create a new folder on the hard disc.

2 Insert the supplied CD-ROM (SonicStage Ver.1.5) into the CD-ROM drive.

3 When the installation window appears, click [Exit] to cancel the installation.

4 Right-click the start menu and start up Explorer.

5 Select [SS15E] on the CD-ROM drive, and then click [Edit] -[Select All].

6 Click [Edit]-[Copy to Folder] (or [Edit]-[Copy]) to copy all files to the folder that you created in step 1.

7 Remove the CD-ROM from the CD-ROM drive, open the folder that was copied to the hard disk and double-click [setup.exe].

8 When the installation window appears, follow the displayed instructions to install [SonicStage 1.5].

—The installation may be done by installing the software from [Start]-[Run].

69