If there are stations that you want preset but cannot do it automatically because their signals are not strong enough, change the setting of “AUTO STOP LEVEL” to “HIGH” in order to enhance detection of receivable stations.
1Press MENU.2Press . (DOWN) or > (UP) repeatedly to select “AUTO STOP LEVEL.”3Press MENU.4Press . (DOWN) or > (UP) to select “HIGH*.”In case the same station is preset on two or more preset numbers because its signal is too strong, set the “AUTO STOP LEVEL” to “LOW.”
5Press MENU.*The default setting at the time of purchase is “MID.”
Note
Changing the setting of “AUTO STOP LEVEL” does not change the reception sensitivity.
Presetting radio stations
You can preset up to 20 FM radio stations, 10 stations each for FM 1 and FM 2.To preset stations automatically (Auto preset)1 Perform steps 1 and 2 of “Listening to the radio” (page 16) to select the band.
2 Press PRESET.“
” and the preset numbers appearin the display.3 Press and hold PRESET for more than 2 seconds.“
” starts flashing, and the player starts scanning for stations from the lower frequencies.
The headphone cord functions as the FM antenna. Extend the cord to improve the reception.
PRESET
MENU | T |
UNER |
The first received station is preset on the preset number 1, and then the player starts scanning for the next receivable station.
If you press Nx/POWER or TUNER during auto presetting, the player stops scanning and exits the auto preset mode, and music data playback starts or the radio is switched to the other band.
(Continued)
17