Aiwa CA-DW635 Tape Operations, ~ Press TAPE and press WA STOP/EJECT to open the cassette holder

TAPE OPERATIONS

1

●Use Type I (normal) tapes only.

●Tapes are played back” on one side only.

~Press TAPE and press WA STOP/EJECT to open the cassette holder.

Th

Deck 1 ck 2

Insert a tape with the exposed side down and the side to be played facing out.

Push the cassette holder to close.

zPress F PLAY to start play.

To stop play, press WA STOP/EJECT.

To pause play, press 11 PAUSE. To resume play, press again.

To fast forward or rewind, press > FF or + REW in stop mode. Then press WA to stop the tape.

To start play when the power is off (Direct Play Function)

Press b PLAY. The power is turned on and play of the

inserted tape begins.

After play on deck 2 finishes, play on deck 1 will start without interruption.

During play on deck 2, press II PAUSE then press F PLAY

on deck 1.

11 PAUSE on deck 1 will be released at the end of play on deck 2.

\

About cassette taDes

● To prevent accidental erasure, break off the plastic

tabs on the cassette tape with a screwdriver or other

pointed tool recording.

““ I.@j)

	\ \Q-
Side A	after	Tab for side A

To record on the tape again, cover the tab openings with adhesive tape, etc.

✎120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

￿

1() ENGLISH