Aiwa CA-DW635 Setting The Sleep Timer, I Press SLEEP, Prepare a source to be mixed and play it

SETTING THE SLEEP TIMER MICROPHONE MIXING

1

–2

The unit can be turned off automatically at a specified time.

I Press SLEEP.

z Within 4 seconds, press+ or -to specify the time until the power is turned off.

Each time the button is pressed, the time changes between 5 and 240 minutes in 5-minute steps.

Connect a microphone with a mini plug to the MIC jack.

Prepare a source to be mixed and play it.

Adjust the volume of the microphone with MIC VO-L and the source to be mixed with VOLUME.

To record the microphone mixing sound

Insert a cassette to be recorded on into deck 1 and press ● REC.

Specified time

To check the time remaining until the power is turned off

Press SLEEP once. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press SLEEP twice to turn off SLEEP on the display.

m

●If you press SLEEP while the power is off, the power is turned on and the sleep timer works directly so that the unit will be turned off after 60 minutes.

To specify the time until the power is turned off, press

SLEEP once again then press < or > within 4 seconds.

●If the unit is turned off during tape playback, > PLAY on the decks will not be released. Press WA STOP/EJECT to release b PLAY.

. During dubbing at high speed, the microphone mixing sound is not recorded.

●If a microphone is placed too close to the speaker, a

howling sound (feedback) may be produced. If this		❑
happens, move the microphone away from the speaker or
decrease the	main volume.
✎ The use of a unidirectional type microphone is
recommended	to prevent howling.

ENGLISH 15