Aiwa CDC-MP3 manual MP3 PLAY, Intro play, Repeat play, Random play, Cd Play, English, continued

CD PLAY

Intro play

Press INT during CD play.

The “SCAN” indication flashes, and the first 10 seconds of all the tracks on the CD are played in order.

When the desired track is found, press INT again. The unit returns to normal CD play.

MP3 PLAY

You can play MP3 files* written on CD-ROMs, CD-Rs, or CD-RWs by following the procedure below.

*An MP3 file stores audio data compressed using MPEG1, the audio layer-3 file-coding scheme. We call files that have the “.mp3” extension “ MP3 files.”

Repeat play

Press REP1 during CD play.

The “REPEAT 1” indication lights up, and the currently selected track is played repeatedly.

Press REP1 again to cancel Repeat play.

Note

If Repeat play is not activated, all the tracks on the CD are played repeatedly.

Random play

Press RANDOM during CD play.

The “RANDOM” indication lights up, and the tracks on the CD are played in random order.

Press RANDOM again to cancel Random play.

Note

During Random play, even if r is pressed repeatedly, it won’t take you back to previous tracks, only to the beginning of the current track.

11 ENGLISH

1 Press OPEN to open the front panel, then insert a CD-ROM, CD-R, or CD-RW with the labeled side upward.

The unit starts scanning the disc.

2 Close the front panel.

During scanning of the disc, “NOW READING” scrolls across the display.

The CD-ROM indicator lights up.

The total number	The total number
of Albums	of Tracks

CD-ROM indicator

Notes

•It may take 2 minutes or more to scan a disc, depending on the complexity of the folder tree. If scanning does not finish within 2 minutes, “CANCEL TO EJECT KEY” appears on the display. If you leave the unit as it is, it will start scanning again.

•If there are no tracks (MP3 files) on the disc, “NO MP3” appears.

After scanning, the total number of albums and tracks appear on the display, then the unit automatically starts playing the disc from the first track of the first album.

continued