SPECIFICATIONS
RADIO SECTION (FM)
Frequency Range: | 87.5 MHz – 108 MHz |
| |
| 87.5 MHz – 108 MHz |
| |
Usable Sensitivity: | 12.7 dBf |
50 dB Quieting Sensitivity: | |
| 17.2 dBf |
IF Rejection: | 80 dB |
Frequency Response: 30 Hz – 15,000 Hz | |
S/N Ratio: | 63 dB |
Stereo Separation: | 35 dB at 1 kHz |
Alternate Channel Selectivity: | |
| 70 dB |
Capture Ratio: | 3 dB |
(AM)
Frequency Range: | 530 kHz – 1,710 kHz | |||
|
|
|
| |
|
|
|
| 531 kHz – 1,602 kHz |
|
|
|
| |
Usable Sensitivity: | 30 µV (30 dB) | |||
|
|
|
|
|
|
|
|
|
|
*Set the frequency increment for your area using the switch on the bottom of the unit.
(The switch is set at the factory to the 10k position [for the U.S.A.])
CD SECTION
Frequency Response: 17
Dynamic Range: | More than 80 dB |
Channel Separation: | More than 65 dB |
S/N Ratio: | More than 85 dB |
Wow/Flutter: | Unmeasurable |
MP3 Decoding: | MPEG 1 Audio Layer 3 |
AUDIO SECTION
Max. Power Output: 45 W ⋅ 4 channels
AUX IN input
Input Sensitivity (load impedance)
AUX IN: | 300 mV (10 kΩ ) |
GENERAL
| 14.4 V (11 to 16 V allowable), | |
| DC, negative ground | |
Load Impedance: | 4 Ω |
|
Tone Control: | Bass ±10 dB at 100 Hz | |
| Treble ±10 dB at 10 kHz | |
Preamp Output Voltage (load impedance): | ||
| 2.2 V (10 kΩ ) | |
Installation Size: | 182 (W) ⋅ | 53 (H) ⋅ 155 (D) mm |
| (7 1/4 (W) ⋅ | 2 1/8 (H) ⋅ 6 1/8 (D) |
| inches) |
|
Accessory Supplied: | Carrying case (1) | |
STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT
Dimensions : approx. 67 (W) ⋅ 26 (H) ⋅ 27 (D) mm
(2 3/4 (W) ⋅ 1 1/16 (H) ⋅ 1 1/8 (D) inches) (excluding holder)
Weight:approx. 38 g (1.33 oz.) (including holder, battery)
Accessory Supplied: Mounting kit (1 set) Lithium battery (1)
Specifications and external appearance are
subject to change without notice due to product improvement.
