STEERING-WHEEL-MOUNTED REMOTE CONTROL UNIT
Setting up the remote control unit
Replacing the battery
1 Pull out the battery holder, gripping the claw Bwhile pressing the groove Ato the right to remove the lithium battery.
Lithium battery (CR2025)
Battery holder
2 Install a new lithium battery with the + side facing upward in the battery holder.
Installing the remote control unit
Installation in a vehicle with
1 Attach the belt d to the inner belt holder e.
Note
If the inner belt holder e does not fit the steering wheel, attach the cushion c to the
belt holder as illustrated.
Large steering wheel
Gap
3 Push the battery holder into the remote control unit until it clicks.
CAUTION
•Keep the lithium battery out of the reach of children. If swallowed, consult a physician immediately.
•To prevent a short circuit, never pinch the battery with pliers, etc.
Gap
Steering wheel
Small steering wheel
Gap
Steering wheel
