Aiwa CDC-Z117 operating instructions CD Player Operation, Auxiliary Equipment, Playing a CD

CD PLAYER OPERATION

Playing a CD

You can play CDs, CD-Rs and CD-RWs using the procedure described below.

1Insert a CD.

“CD” appears in the display. CD play starts.

If a CD is already inserted, press FNC repeatedly to select CD play mode.

In normal play, when the last track finishes, the unit returns to the first track and continues to play.

Labeled-side up

CD indicator Track number

Elapsed playing time

Intro Play

You can locate a desired track by monitoring the first 10 seconds of all the tracks on a CD.

1Press INT during CD play. “SCAN” appears in the display.

2Press INT again when the desired track is played. The unit returns to normal CD play.

One track Repeat Play

You can play a track repeatedly.

1Press REP1 during CD play.

“REPEAT1” appears in the display.

To cancel One track Repeat Play, press REP1 again.

Random Play

You can play all the tracks in random order.

1Press RNDM during CD play.

“RANDOM” appears in the display.

To cancel Random Play, press RNDM again.

Note

During Random Play, pressing r allows you to skip only to the beginning of the current track, not to the previous track.

AUXILIARY EQUIPMENT

Listening to a cassette/MD/MP3 portable

player or other equipment

You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information.

Be sure to remove inserted CDs to prevent possible damage to the unit before connecting the equipment.

To

Eject a CD

Skip to the next track

Go back to the beginning of the current track Each extra press skips backward one extra track

Locate a specific point in a track

Press

z

t

r

Press and hold r or t until you find the point.

AUX IN jack

1Connect a cassette/MD/MP3 portable player or other equipment via the unit’s AUX IN jack (3.5 mm).

2Press FNC repeatedly until “AUX” appears in the display.

During AUX mode, the clock display appears.

Note

•When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track.

•A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction.

•If a CD-R or CD-RW with no data or incompatible data is inserted, “E03” will appear in the display. The unit cannot play such discs.

5 ENGLISH