cPLAY
aPAUSE
r, t
sSTOP
RECORDING
1 Load a tape with the side to be recorded on facing up and the exposed side facing forward.
2 Press TAPE/REV MODE to select the reverse mode.
: Records on one side only.
or | : Records on both sides. Check that |
xis displayed, so as to start recording from the side facing up.
3 Get ready to record from the source.
To record from a CD, press CD and load the disc. To record from a radio broadcast, press TUNER/ BAND and tune to a station.
4 Press wREC/REC MUTE to start recording.
“REC” flashes on the display.
When the selected function is CD, CD play and recording starts simultaneously.
To record only the selected tracks of a CD
1Follow steps 1 to 3 of PROGRAMMED PLAY on page 9 to program tracks.
2Press w.
To stop recording, press s. To stop CD play, press it again.
To pause recording (only when the source is TUNER), press a. To resume, press it again.
To erase recording, press TAPE/REV MODE and press w.
After recording, press POWER 6STANDBY/ON to turn the power off.
To insert blank spaces
When recording from the radio,
1Press w REC/REC MUTE in recording or recording pause mode.
“REC” indicator flashes quickly and the tape runs without recording for 4 seconds, then pauses.
2Press a to resume recording.
To make blank spaces less than 4 seconds, press a En
while “REC” flashes quickly.
To make blank spaces more than 4 seconds, press
wagain after the tape pauses.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Side A
Tab for side A
ENGLISH 11
