Aiwa CSD-NS1 Presetting Stations, Sound Adjustment, 0-9,+10, Display, Mode, Band, VOLUME k, cPLAY

Models: CSD-NS1

1 14
Download 14 pages 47.75 Kb
Page 7
Image 7
0-9, +10

 

0-9, +10

DISPLAY

MODE

BAND

EQ

VOLUME k, i

cPLAY

aPAUSE

r, t

s

 

PRESETTING STATIONS

You can preset up to 15 stations in each band.

1 Select a station.

2 Press * a PAUSE/SET once so that “MEMO” flashes to store the station.

A station is assigned a preset number, beginning from 1 in consecutive order for each band.

Frequency

Preset number

* or a PAUSE on the remote control

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 15 preset stations have already been stored for a band.

To listen to preset stations

Select a band then press d PLAY/DIR/PRESET repeatedly.

cPLAY on the remote control is also available.

To select a preset number directly with the remote control

Press the numbered buttons 0-9 and +10. Example:

To select number 15, press +10 and 5. To select number 10, press +10 and 0.

To clear a preset station

Select the preset number first. Press s, and press a within 4 seconds.

The higher numbers in the band are decreased by one.

SOUND ADJUSTMENT

Volume or tone adjustment does not affect recording.

VOLUME/TIMER (VOLUME)

Turn VOLUME/TIMER, or press VOLUME k or i on the remote control. The volume level is displayed as a number 0 to 25 (MAX).

The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more.

Pressing DISPLAY on the remote control displays the adjusted volume level.

*3-MODE EQ (equalizer)

Press 3-MODE EQ repeatedly until the desired mode is displayed.

The equalizer mode changes to ROCK, POP, JAZZ or no equalization, cyclically.

ROCK - Emphasizes the high and low range of music.

POP - Emphasizes voice and midrange of music. JAZZ - Emphasizes the low range of music.

* or EQ on the remote control

T-BASS system

The T-BASS system enhances the realism of low-

frequency sound.En Press T-BASS to turn it on or off.

QSURROUND system

The QSURROUND system built into this unit uses only two speakers at the left and right to create an atmosphere that sounds as if you are surrounded by two front speakers and two rear speakers.

Press QSURROUND to turn it on or off.

The QSURROUND system does not work for monaural sources.

At higher volumes, turning QSURROUND on may cause sound distortion. In this case, make the volume down.

ENGLISH 7

Page 7
Image 7
Aiwa CSD-NS1 Presetting Stations, Sound Adjustment, 0-9,+10, Display, Mode, Band, VOLUME k, cPLAY, aPAUSE, T-BASSsystem