2
RADIO | SNOOZE |
| |
6STANDBY |
|
3,4,5 
4,5
1
ALARM SETTING | English |
|
The radio or buzzer automatically sounds at the designated time every day.
You can set two different alarm times, one in alarm 1 and one in alarm 2, so that the alarm timer operates twice a day.
•Before setting, tune in to a station (See page 12).
•Operate when the radio is turned off.
To set the alarm time in alarm 1
1Set the ALARM switch to RADIO or BUZZER.
2Press ALARM MODE repeatedly until ALARM 1 appears. You cannot set alarm time when both ALARM 1 and ALARM 2 appear.
When the alarm time is not set in alarm 1, 12:00 flashes for about 5 seconds in the display.
3While the alarm time is flashing, keep SET pressed for 3 seconds.
ALARM 1 and the hour start flashing.
4While the hour is flashing, press UP or DOWN to set the hour and press SET.
The minutes start flashing.
5While the minutes are flashing, press UP or DOWN to set the minutes then press SET.
ALARM 1 lights up and alarm 1 is set.
When the preset time comes, the radio or buzzer sounds. The volume of the buzzer increases after 10 seconds.
To turn off the alarm, press RADIO6STANDBY or SNOOZE. When SNOOZE is pressed, the alarm or the radio will automatically come on again after about 5 minutes.
To cancel the alarm before the preset time comes, press ALARM MODE repeatedly until both ALARM 1 and ALARM 2 disappear.
16
