Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1(COAXIAL) to the corresponding in jack on your amplifier. Use an optional coaxial audio cable.Connect this unit’s DIGITAL AUDIO OUT jack
2 You will need to activate this unit’s digital output. (See “Digital Audio Output” on page 18).
Digital
A digital
Warning:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Rear of this unit
| VCR IN+OUT/DVD OUT | DVD EXCLUSIVE OUT |
|
|
| DIGITAL | AUDIO |
| AERIAL | AUDIO OUT | OUT |
EURO AV2 |
| ||
|
|
| |
DECODER |
|
|
|
|
| COAXIAL | R |
|
|
| |
EURO AV1 | RF.OUT | Pb | L |
| |||
AUDIO/ |
|
|
|
VIDEO |
|
|
|
| DVD/VCR |
| VIDEO OUT |
| OUT |
|
|
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out |
| Digital |
| ||
|
| connection |
LR
COAXIAL
AUDIO INPUT | DIGITAL INPUT |
Amplifier (Receiver)
Notes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–To see the audio format of the current DVD in the On- Screen Display, press AUDIO.
Accessory Audio/Video (A/V) Connections to this unit
Connect the AV 3 IN jacks on the unit to the audio/video out jacks on your accessory component, using the optional audio/video cables.
POWER
STANDBY/ON
AV3 IN
VIDEO L – AUDIO – R
DVD VCR
10