Before Operation - VCR part

Setting the clock Manually

The clock in your VCR controls time and date settings for your VCR.

The clock is set automatically during ACMS (Automatic Channel Memory System) when your VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.

1Press 1or 2to select TIME DATE. Press OK/ENTER.

The auto adjust mode can be set to “OFF” by pressing

3or 4if you want to set the time manually. Press OK/ENTER.Press i/SETUP.

 

AUTO

ADJUST : ON

 

- -

 

1

2

 

TIME

OK i

DATE

 

 

 

HH MM

DD MM YY

 

 

 

- -

: - -

- - . - - . - - - - -

 

 

 

 

 

 

 

 

 

1

2

 

 

 

 

 

 

TIME

 

 

 

 

i

 

DATE

 

 

 

 

 

 

 

 

 

 

2to alter the HOURS, MINUTES, DAY, MONTH and YEAR.

Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when you enter the year.Use the numbered buttons on the remote control

 

HH

MM

DD

MM

YY

 

8 :

00

1

. 01 .

02 TUE

1

2

 

 

 

 

TIME

 

 

 

i

DATE

 

 

 

3 If you make a mistake press 1or 2and enter the correct details.

4Press i/SETUP.

To set the colour system

1Press i/SETUP.

2The main menu will appear on the TV screen.

3 Press 1or 2to select the SYSTEM and press OK/ENTER.

4 Press 3or 4to select according to the COLOUR system used.

 

AUTO

A B

 

REC

SYS- C

 

PAL

TEM OSD

SYS-

f OSD

MESECAM

 

TEM

 

 

ON

 

 

i

OFF

 

 

5 Press i/SETUP to remove the menus from the TV screen.

12