Additional Operation - VCR part

Hi-Fi Stereo Sound System

Your VCR will record and playback Hi-Fi stereo sound. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.

1standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:

STEREO

Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape.

BIL

Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded on the mono track of the video tape.

MONO

The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation.Your VCR’s allows you to enjoy broadcasts with

2 Press AUDIO repeatedly until the desired audio mode appears.

3In BIL playback the primary language is output onthe left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language willbe output from both channels when the audio setting is MONO.

Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO.The choice is STEREO, LEFT, RIGHT and MONO.

Wide Screen Compatibility 16:9

Your VCR can record and play back wide screen aspect ratio programmes (16:9). To record a wide screen format programme successfully the correct type of wide screen signal must be broadcast by the TV station.

1Press i/SETUP.

Press F or G to select 16:9/4:3. Press OK/ENTER.Switch on your VCR.

216:9. AUTO:

Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal.

4:3

Only for playing back and recording Normal format recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen format recordings (16:9).Press D or E repeatedly to select: AUTO, 4:3 or

 

P

1

2

A B

REC

Pr-12

AUTO

C

RSET

ACMS

OSD

f OSD

 

+ -

4:3

16:9

 

 

4:3

ON

16:9

DECO-

16:9

i

OFF

4:3

DER

3screen.

To enjoy Wide-Screen playback you must

connect your VCR to the TV using a SCART cable.Press i/SETUP to remove the menus from the TV

To set the decoder

We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page

9.For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start.

1The main menu will appear on the TV screen.

Press F or G to select the DECODER. Press OK/ENTER.Press i/SETUP.

2ON: When the decoder is connected to the AV2 socket.

OFF: When another VCR is connected to the AV2

socket.

Press i/SETUP to return to a TV picture.Press D or E to select.

 

 

 

1 2

 

A B

 

 

 

1 2

A B

 

PSET

Pr-12

 

 

C

 

 

 

REC

ACMS

TIME

SYS-

REC

PSET

Pr-12

TIME SYS-

C

R

DATE

TEM

OSD

ACMS

OSD

f OSD

 

 

 

 

16:9

 

R

 

DATEAUTOEM

16:9

 

+ -

 

 

4:3

f OSD

 

+ -

4:3

ON

16:9

DECO-

OPR

 

OK i

16:9

DECO-

4:3

OFF

4:3

DER

 

ON

OPR16:9

i

 

 

 

 

 

 

OFF

4:3

DER

30