You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape.
1Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of tape left will appear if there is a tape loaded.Press CLK/CNT to display.
After 3 seconds the majority of the On Screen
2 Displays will clear leaving only the clock or tape counter and the amount of tape left on the screen. Press CLK/CNT again to remove all displays from the TV screen.
Tape Counter Memory StopThe Digital Tape Counter can be displayed on the display window instead of the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1Press CLEAR to set the counter to 0:00:00. Press PLAY or start recording.
The tape counter will display the actual play time in hours, minutes and seconds.Press CLK/CNT.
2Press r.
The tape will rewind and automatically stop when the counter returns to 0:00:00.Press STOP when playback or recording is complete.
Child LockThe control buttons on the front of the VCR can be switched off so that your VCR can only be operated using the remote control.
1
will appear in the display window.
None of the buttons on the front of your VCR will
work (except STOP and EJECT). If any buttons on the front of your unit are pressedPress C.LOCK.
|
|
| will flicker in the display window for a few sec- |
| onds. | ||
2 | Press C.LOCK again to switch off the child lock. | ||
|
| will disappear in the display window. | |
Set the OSD off when dubbing a tape to another tape.
1Press i/SETUP.
Press 1or 2to select F.OSD ON/OFF, then press
2 OK/ENTER.
3Press 3or 4to select ON or OFF.
4Press i/SETUP to return to the normal screen.
OPERATION
29