Note
Recording the tape continues, even if you press PAUSE(X) while copying.
32
The unit will go into Record mode.
4
Stop the Copy Process.
5 When the DVD is finished playing, press the VCR on the remote control and then press STOP (x) to end the copy.
You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
Press REC/OTR (z) on the VCR deck.
Insert a blank VHS video tape into the VCR deck.
Press PLAY on the DVD deck. The DVD will go into play mode
 If the DVD disc menu appears, you may need to press the PLAY manually to begin copying.
2
3
Insert VHS Tape.
Special Recording Copying from DVD To VCR
This unit allows you to copy the contents of a DVD to a VHS tape.
Note
If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “COPY PROTECT- ED DISC” appears on the TV screen.
Insert Disc.
1 Insert the disc you wish to copy in the DVD deck and close the disc tray.

Recording from another video recorder

With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder.

Note

In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A.

1on the rear panel of your unit or the AV 3 IN sock- ets on the front panel of your unit.VCR A should be connected to the SCART socket

Insert the recorded

tape into VCR A and a blank

2 tape into VCR B.

 

To start recording,

press the REC/OTR on VCR B

3 and PLAY on VCR A.

4 When you want to finish copying, press the STOP on both video recorders.