I N S TA L L AT I O N I N S T RU C T I O N S
ELECTRICAL CONNECTIONS (cont.)
IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996 NEC), MOBILE HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES DO NOT PERMIT GROUNDING TO THE NEUTRAL (WHITE) WIRE
ENGLISH
Observe all governing codes and local ordinances.
1Disconnect the power supply.
2At the circuit breaker box, fuse box or junction box, connect appliance and power supply cable wires as shown.
WARNING
If connecting to a
4-WIRE GROUNDED JUNCTION BOX
Cable from power supply
White wire
Ground(no connection) wire
Red |
|
wires | Black |
| wires |
Junction box
Green wire (ground) | connector |
| |
| Cable from cooktop |
COOKTOP INSTALLATION
1Visually inspect the cooktop for damage. Make sure all cooktop screws are tight (see below for locations).
Screws
WARNING
Do not remove the nylon spacers on the edges of the cooktop. These spacers center the cooktop in the space provided. The cooktop must be centered to allow proper venting and to prevent excess heat buildup that may result in heat damage or fire.
2Carefully lower the cooktop into the counter- top cutout, making sure not to trap any wires.
NOTE: Do not use caulking compound. The cooktop must be removable, should service be required.
Nylon spacers 
25
