PROGRAMMED EDIT

RECORDING

2

 

2

 

s

4,5

8

3,7

f,g

FUNCTION

1

s

 

f,g

Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed.

NOTE

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side.

6Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

Program number

Selected track number

Remaining time of side A

Programmed tracks

7Press MODE to select side B and program the

tracks for side B.

After confirming B on the display, repeat step 5.

Tape side B (back side)

RECORDING

1Insert the tape into the deck.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press CD, and load the disc.

You can press FUNCTION on the remote control repeatedly to select the CD function.

3Press MODE four times.

4Press the numbered buttons to designate the tape

length.

10 to 99 minutes can be specified.

Example: When using a 60-minute tape, press 6 and 0.

f and g buttons are also available to designate the tape length.

5Press the numbered buttons to program a track.

Example: To select the 10th track, press +10 and 0.

8 Press w to start recording.

En

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts.

To stop recording

Press s. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press MODE to select side A or B, and press

grepeatedly.

Program number

Track number

Programmed tracks

To change the program of each side

Press MODE to select side A or B, and press s to clear the program of the selected side. Then program tracks again.

To clear the edit program

Press s twice.

NOTE

Recording is prohibited if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 15

Page 15
Image 15
Aiwa LCX-357 Programmed Edit Recording, Repeat for the rest of the tracks for side a, To change the program of each side