TIMER
TIMER PLAYBACK AND TIMER
RECORDING
TIMER/
SLEEP
CD
POWER a
f,g | POWER | |
a | ||
| ||
| f,g |
The unit can be turned on at a specified time with the
Preparation
Make sure the clock is correctly set. (See page 6.)
1Press TIMER/SLEEP repeatedly to select timer playback or timer recording.
“TM PLAY” for timer playback “TM REC” for timer recording
2Within 4 seconds, press a.
NOTE
If you do not press a within 4 seconds, another operation may start.
3 Set the timer-on time.
Designate the hour of the
4Press for gto select the source, and press a.
•For timer play of a CD, select “CD.”
•For timer play of a tape, select “TAPE.”
•For timer play/recording of a radio broadcast, select “FM” or “AM.” You will select the band later in step 6.
•For timer play/recording of the equipment connected to the AUX jacks, select “AUX.”
5Select the duration for the
The duration for the
6Prepare the source.
•For timer play of a CD, load the CD.
•For timer play of a tape, insert the tape.
•For timer play/recording of a radio broadcast, press TUNER/BAND to select the band and tune in to the desired station.
•For timer play/recording of the equipment connected to the AUX jacks, set the timer of the equipment so that play begins at the same time.
7For timer recording: Insert the tape to be recorded.
8Adjust the volume and tone.
The source sound will be audible at the volume set here when the power turns on at the set time.
However, If the volume level is set to higher than 20, it is automatically set to 20 when the unit turns on by the timer.
9Press POWER to turn the unit off.
5(and 4) remain on the display after the power is turned off (timer standby mode).
When the
16 ENGLISH