NOTE

Timer playback and timer recording will not begin unless the power is turned off.

If you use the unit while the timer is set, repeat steps 6 to 8 to prepare the source (and the recording destination), and adjust the volume and tone before turning off the power.

To check the timer setting

Press TIMER/SLEEP repeatedly so that “TM PLAY” or “TM REC” flashes. After 4 seconds, the timer-on time, the source and the duration for the timer-activated period are displayed for 4 seconds.

To change the timer setting

Set the timer again from the beginning.

To cancel timer standby mode temporarily

Press TIMER/SLEEP repeatedly so that “TM OFF” is displayed. 5 (and 4) disappear on the display.

SLEEP TIMER

1

TIMER

 

2

 

3

a

 

f,g

The unit can be turned off automatically at a specified time.

1Press TIMER/SLEEP so that “SLEEP” appears on the display.

2Within 4 seconds, press a.

3Within 4 seconds, press f or g to specify

the time until the power is off.

Each time the button is pressed, the time changes between 5 to 240 minutes in minute steps.

En

Specified time

To check the time remaining before the power is turned off

Press TIMER/SLEEP.

The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Press TIMER/SLEEP so that “SLEEP” appears on the display, and within 4 seconds, press s.

ENGLISH 17

Page 17
Image 17
Aiwa LCX-357 manual Sleep Timer