(—’3,7,

 

 

8;9’

5-+

.7Tj

5

 

 

4,5

3,7,

8,9

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.

1 Insert the tape into deck 1.

Insert the tape with the side to be recorded on first facing out from the unit. Wind up the tape with +4,

2Press CD and load the disc(s).

3Press CD EDIT/CHECK twice while pressingSHIIFT on the remote control.

“EDIT” and “PRGM” are displayed,

@When “Al” is displayed, press CD EDIT/CHECK while

pressing SHIFT again.

4 Press numbered buttons on the remote control to designate the tape length.

10 to

99

minutes

can be

specified,

9 The

+

and ~

are

also available to designate the tape

length,

 

 

 

Tape side A (front side)

Tape length

Maximum

recording

 

time for

side A

.5 Press DISC DIRECT PLAY 1-3 to select a disc. Then, press numbered buttons O-9 and + 10 on the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC DIFiECT PLAY 2, then press +10 and O.

Selected track number

Remaining time on side A

Program number

Programmed tracks

6 Repeat step 5 for the rest of the tracks for side

‘

 

A.

i!

~i

:..~

 

 

,,

 

ay,~:

A track whose playing time is longer than the remaining time “,) ~

!11! ‘...

cannot be programmed,,,,

y,, ,,:.

E

7Press CD EDIT/CHECK while pressing SHIFT on “~the remote control to select side B and program “’~the tracks for side B.

After confirming “Bon the display, repeat step 5.

Tape side B (reverse side)

8Press CD EDiT/CHECK while pressing SHIFT on the remote control to select side A and press ●

to start recording.

CD play and recording of edited tracks for the first side start simultaneously, When the end of tape is reached, deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9Press CD EDIT/CHECK while pressing SHIFT on the remote control for recording of the second

side.

“B”is displayed.

10 Turn over the tape in deck 1 and press ● to start recording.

Recording starts.

To stoprecording

 

❑

Press

■/A on deck 1, Recording

and CD play stop

simultaneously.

 

To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK while pressing SHIFT

on the remote control to select side A or B, and press - or

-repeatedly.

Tape side

Program number

Track number

Programmed

 

track numbers

To change the program of each side

Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT disappears on the display.

●Up to 30 tracks can be programmed from any of the inserted discs.

●“FUL12is displayed if you attempt to program more than 30 tracks.

ENGLISH I 3