PROGRAMMED EDIT RECORDING

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.

1Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press CD and load the disc(s).

3Press CD EDIT/CHECK twice while pressing

SHIFT on the remote control.

“EDIT” and “PRGM” are displayed.

•When “AI” is displayed, pressCD EDIT/CHECK while pressing SHIFT again.

4Press numbered buttons on the remote controlto designate the tape length.

10 to 99 minutes can be specified.

•f, g or MULTI JOG are also available to designate the tape length.

 

Tape side A (front side)

Tape length

Maximum recording

time for side A

 

5Press DISC DIRECT PLAY 1-3 to select a disc. Then, press numbered buttons 0-9 and + 10 on

the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and 0.

Selected track number

 

Programmed tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Program number

Remaining time on side A

6Repeat step 5 for the rest of the tracks for side

A.

A track whose playing time is longer than the remaining time cannot be programmed.

7Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side B and program

the tracks for side B.

After confirming “B” on the display, repeat step 5.

Tape side B (reverse side)

8Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A and press w

REC/REC MUTE to start recording.

The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9Press CD EDIT/CHECK while pressing SHIFT on the remote control for recording of the second

side.

“B” is displayed.

10 Turn over the tape in deck 2 and press w REC/REC MUTE to start recording.

Recording starts.

To stop recording

Press s. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press f or

grepeatedly.

Programmed

 

tracks number Track number

Disc number

Tape side

Program number

To change the program of each side

Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press s CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press sCLEAR twice so that “EDIT” disappears on the display.

•Up to 30 tracks can be programmed from any of the inserted discs.

•“FULL” is displayed if you attempt to program more than 30 tracks.

16 ENGLISH