SOUND
AUDIO ADJUSTMENTS
VOLUME
Turn VOLUME on the main unit, or press VOL on the remote control.
The volume level is displayed as a number from 0 to MAX (31). The volume level is automatically set to 16 when the power is turned off with the volume level set to 17 or more.
GRAPHIC EQUALIZER
This unit provides the following three different equalization curves. ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press one of ROCK, POP or CLASSIC.
The selected equalization mode is displayed.
SUPER T-BASS SYSTEM
The
Press
Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.
To select with the remote control
press
BBE SYSTEM
The BBE system enhances the clarity of
Press BBE.
Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.
•Low frequency sound may be distorted when the
•When playing back a tape recorded with BBE, it is recommended that BBE be set to off to avoid distorted high frequency sound.
To display the current GEQ mode
Press GEQ once while pressing SHIFT on the remote control. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press one of ROCK, POP or CLASSIC twice. “GEQ OFF” is displayed.
To select with the remote control
Press GEQ repeatedly while pressing SHIFT. The GEQ mode is displayed cyclically as follows.
ROCK 
POP 
CLASSIC 
GEQ OFF (cancel)
Using the headphones
Connect headphones to the PHONES jack with a standard stereo plug (ø 6.3 mm, 1/4 inch).
No sound is output from the speakers while the headphones are plugged in.
Sound adjustment during recording
The output volume and tone of the speakers or headphones are freely varied without affecting the recording.
8 ENGLISH